.
|
Available from your local communications equipment
supplier, on-line resellers, and direct from Omnicron
Net-30-Day terms
to well rated firms and Government agencies. Payment can be made via
credit card, check, or wire transfer.
Same day shipping for most orders received prior to
3:00 PM EST.
|
| |
 CASSETTE TAPE PLAYERS
MODEL VP-1, VP-1CT,
VP-4, VP-4CT,
VP-8, & VP-8CT
The VP series of cassette tape players is designed to
playback the recordings made on the VLR and CR-1 series of OMNICRON professional Voice
Logging Recorders. They provide an inexpensive means of playing tapes without tying up the
main recorder/player. Since these players do not have the ability to make recordings,
accidental erasure is not possible.
VP cassette tape players are available with or without the
second CT track, in all three VLR speeds, and in both CR-1 speeds. See the listing below
to determine which VP unit is compatible with your recorder.
 | FEATURES:
l Cue, Review, and
Mechanical Pause
l Full Range 5" Built-in Speaker
l Four 1/4" Headphone Jacks
l Auto-Stop / Auto-Shutoff Mechanism
l Attached Three Wire AC Power Cord
l Power Cord Storage Compartment
l 120VAC 10W or 6-C Cell Battery Operation
l 2X Digital Index Counter with Reset
l Voice / Time Switch - with CT Option
.
|
| SPECIFICATIONS
l Dimensions -
7-3/4" x 11-1/2" x 2-3/4", 4 lbs.
l Frequency Response -
125Hz to 8Khz
l Signal to Noise -
better than 40dB
l Audio Power Output - 1
Watt @ 5% T.H.D.
|
| SELECT THE PAYER TO MATCH YOUR RECORDER
.
l VP-1 for use with cassette
tapes recorded in VLR-1 or the VR-1 operated in standard speed.
l VP-1CT for use with
cassette tapes recorded in VLR-1CT standard speed recorders.
l VP-4 for use with
cassette tapes recorded in VLR-4 or CR-1 operated in 1/4 speed.
l VP-4CT for use with
cassette tapes recorded in VLR-4CT 1/4 speed recorders.
l VP-8 for
use with cassette tapes recorded in VLR-8 1/8 speed recorders.
l VP-8CT for use with
cassette tapes recorded in VLR-8CT 1/8 speed recorders.
|
|
[