NOTE: Recorders
that use analog tape for recording are not recommended for new
applications. The accessories on this page are for use with Omnicron VLR,
XLP, and CTR recorders.
Since 1999, most applications are
better suited to the use of recorders that use digital storage media
(HDD/CD/DVD) — See:
Digital Recorders and Digital
Recorder Accessories pages.
Analog
Recorder Accessories
(for use only with Omnicron VLR, XLP, & CTR recorders)
Click
here for Accessories used with Computer Sound cards, etc.
Click here for Accessories
used with Digital Voice Logging Recorders
Click
here for PDF Accessory Pages — Page
1, Page 2
Four Page
Brochure - 11" x 17", 144k PDF |
|
|
 | TSA-3S TELEPHONE SUPERVISORY ADAPTER WITH
SWITCH
 The TSA-3S
provides
all of the functions and features of the TSA-3 with the addition of
an ON/OFF switch which is used to disconnect the telephone audio
from the recorder when you do not want your conversation recorded.
2-1/4" L x 2" W x 7/8" H without cables, ivory color.
Click here for installation
instructions and photo.
$34.70 |
|
| TSA-3A TELEPHONE
HANDSET SUPERVISORY ADAPTER
This version of our TSA-3 has an isolated microphone level output
that can be used with consumer cassette recorders. It is also used
with Omnicron VLR recorders when the AUX input is used by another
audio source and you wish to add the audio from a phone along with
your AUX audio. Click here for installation
instructions. $34.70 |
|
| LIC-390 ISOLATION COUPLER
WITH DC SENSING
This
deluxe coupler is used to connect a logging recorder to telephone
lines. It provides a balanced line-input, transformer isolation,
balanced line-output, and a voltage sensing mute circuit to prevent
recorder activation between telephone conversations. 3"L x
2"W x 1" H. Click here for
installation
instructions and photo. $65.20 |
|
| LIC-100 ISOLATION COUPLER
Similar to the LIC-390 but without the voltage sensing
circuitry. It is used to provide the isolation and protection required when connecting a
logging recorder to a two-way radio remote control circuit (DC or tone), or to telephone
circuits when DC sensing is not required. 3"L x 2"W x 1" H. Click here for installation instructions.
$36.20
|
|
| RSA-M1 SUPERVISORY
ADAPTER FOR MOTOROLA
2-WAY RADIOS WITH MODULAR MICROPHONES
Used to provide a simple and inexpensive method of connecting an Omnicron
VLR recorder to older, non programmable, Motorola
two-way radios. It is can be used with the radios
that have an eight position modular microphone jack (such as
the 1st series of
Radius radios that have receive audio at their microphone
jack 100% of the time). Not suitable for newer
programable radios. Allows the recorder to
monitor both receive and transmit audio for voice activated recording. Click here
for
installation instructions and
photo.
$65.50
|
|
| LIC-1PC
Telephone
Line Audio Tap for use with PC Sound cards, etc.
Similar to the LIC-100 but with adjustable audio output
level. It is used to provide high quality audio from a telephone line for use with audio
monitoring and recording equipment. It has a balanced line-input, transformer isolation,
balanced line-output, and a screwdriver adjustable audio output level. It also provides the
protection required when connecting to a phone line or two-way radio remote control
circuit (DC or tone). The audio output level can be set for use with either Microphone
Level or Line Level monitoring equipment. Click here for installation
instructions and photo. $53.50 |
|
| TSA-3B & TSA-3SB Telephone Couplers with BEEP TONE
Omnicron TSA-3, and TSA-3S couplers are
available with a built-in beep tone circuit. The beep is used in some applications to
remind telephone operators that their conversation is being recorded. Since these beeping
couplers sense recorder operation through the recorders remote jack, they are designed for
use only with Omnicron VLR recorders. Both the volume and interval of the beep tone are
adjustable. A green LED indicates status. For telephone handset connection with a beep,
order the TSA-3B instead of the TSA-3. If you need an ON/OFF switch like the TSA-3S, order
the TSA-3SB. Click here for TSA-3B photo and
instructions or typical installation line drawing. Click here for TSA-3SB photo
and instructions, or typical installation line drawing. TSA-3B - $102.40, TSA-3SB - $114.20
|
|
|
 AUX-6S AUXILIARY INPUT CABLE
This accessory cable has a 3.5mm mini plug on one end
to match the "AUX" jack on the recorders, and spade-lug terminals on the other
end for connecting your recorder to the audio output of couplers or radios which do not
have their own connecting cables. It is six feet long and can be special ordered in other
lengths and with different types of connectors on either end of the cable to meet specific
requirements. Click here for photo.
$5.75
|
|
|
 MHP-735 DELUXE HEADPHONES
For private monitoring during record or playback, one or two
headphones can be used with each "VLR" recorder. Up to four headphones can be
used with each "VP" player. Speaker-like sound elements provide a wide range of
sound reproduction. Large comfortable earmuffs are washable. Click here for photo.
$54.00
|
|
|
 CASSETTE TAPE
Omnicron MLC-120 and MLC-90
Magnetic Leader Cassette Tapes permit recording to start immediately, with no waiting, or
loss at the beginning or end of the cassette. Click here for photo.
MLC-120 $4.80, MLC-90 - $4.05 (quantities less than 10)
RECORDING TIME
IN OMNICRON VLR RECORDERS
|
Tape Size |
VLR-1
1-7/8 ips |
VLR-4
15/32 ips |
VLR-8
15/64 ips |
MLC-120
per side |
1
hours |
4 hours |
8
hours |
MLC-120
both sides |
2 hours |
8
hours |
16
hours |
MLC-90
per side |
45
minutes |
3 hours |
6
hours |
MLC-90
both sides |
90
minutes |
6 hours |
12
hours |
|
| SSL-250
SELF-STICK CASSETTE
LABELS
New labels prevent confusion when cassette tapes are re-used.
These die cut labels provide space for Start/Stop Time and Date, Circuit/Line numbers,
Tape
number, etc. Package of 250 replacement tape labels. $9.10 |
|
| RMC-88
REMOTE DYNAMIC MICROPHONE
The Omnicron RMC-88 is an external microphone for use
with portable cassette tape recorders. It has a built-in ON/OFF
switch to control the audio output to your recorder. Click here for photo.
$14.80 |
|
| Contact
your Omnicron
representative for
assistance in the selection of the products that are best suited to your application. |
|
|
|
Provides a simple means of connecting your
VLR logging
recorder so that it can monitor both sides of all conversations that take place on the
handset or headset of a telephone. It can be used on telephones which have a standard four
slot modular handset jack. Click here for 
[