6 Switching On and Getting Started

6.1 General

Once the line interface cables have been connected, connect the power cable and switch ON the recorder. The power ON/OFF switch is located next to the power connector at the rear of the unit.

Initially, you will hear the internal fan start, the internal hard drive operating and see blue line activity on the LCD screen. You will hear an initial “beep” from the system, the Total Recall logo will be displayed and finally a hum from the speaker. This is normal. After start up, the Logging Menu will be displayed with the Padlock Icon “locked”. This menu is the “default” menu that the system will revert to after 120 seconds of inactivity.

Change the contrast of the LCD screen by holding down the <#> (hash) key and pressing either of the <UP> <DOWN> arrow keys. Before commencing to navigate the menu structure, enter the password [default 0000] at the Logging Menu and then press <SELECT>. The Padlock Icon in the top right corner of the LCD displays “unlocked”.

6.2 Main Menus

There are three main menus; Options, Search, and Logging.

6.2.1 Options Menu

General	Set Language, Time & Date, Password
Line	Set Line Triggering, enable Call Monitoring, enable Beep Tone
Archive	Set Archive Reminder and Auto Archive
Call	Set Maximum Call Length, VOX Timeout and Recording Period
System Maintenance	Install system software upgrades, rebuild call database, set Recorder ID
System Shut Down	Shut down the system

6.2.2 Search Menu

Search	Set search parameters and search the database or archived CD
Tag All	Tag / Untag found calls
Archive	Manually archive calls to CD
	Playback calls found through the search process

6.2.3 Logging Menu

	Enter password to access the menus
	View current call data, call activity, and status line
	Set Live Monitoring (if enabled)
	Playback selected calls
	Tag / Untag calls