|
.
|
Available from your local communications equipment
supplier, on-line resellers, and direct from Omnicron
Net-30-Day terms to well rated firms and
Government agencies. Payment can be made via credit card, check, or
wire transfer.
Same day shipping for most orders received
prior to 3:00 PM EST. |
| |
|
|
|
VII. Recorder Accessories
TeleCorders come with cables that are suitable for installations where the
audio sources are terminated with modular phone jacks. If the supplied
cables are not appropriate for your installation, contact your TeleCorder
representative for assistance in selecting accessory cables or adapters to
match your application.
TSA-3LM Telephone Handset
Supervisory Adapter
The TSA-3LM is the easiest, and most popular way to monitor
conversations on individual telephones. It can be used to provide a simple
method of connecting the recorder to the telephone handset or headset audio.
It can
be used with most telephone styles that have a standard modular handset or
headset jack (RJ-10, 4P4C). Simply connect one end of the cable in series
with the telephone handset or headset cord and connect the other end to the
recorder. The TSA-3LM has a twenty-five foot (25') output cable that can be
extended with the T25-EXT or other suitable phone line extension cables.
TSA-SLM Telephone Handset
Supervisory Adapter, with on/off switch
The
TSA-SLM provides all of the functions and features of the
TSA-3LM with the addition of an on/off switch that is used to disconnect the
telephone audio from your recorder when you do not want your conversation
recorded. The TSA-SLM has a 25' output cable that can be extended with the
T25-EXT.
TSB-15L Boosts Weak Handset
Audio for Recording
Handset
audio levels from most phone sets is loud enough to be
satisfactorily recorded with your TeleCorder. However, some phones may
have weak audio that can be boosted by +15db by using the TSB-15L.
Instead of connecting the handset audio directly to the recorder, connect it
to the modular input jack on the TSB-15L, and connect its 10″ output cable
to the recorders input jack. Audio levels are increased by a transformer.
No external power is required.
TSB-6 Telephone Line Switch Box
Connects in series with the phone cable (RJ-11 single-line circuit) feeding
your recorder. With its ON/OFF switch in the OFF position the output RJ-11
jack is disconnected from the input RJ-11 jack. The TSB-6 includes a six
foot phone cable terminating in an RJ-11 plug.
T-18 Telephone Line Cable with T
Adapter
This
multi-purpose cable assembly can be used to connect between
two RJ-11 (single line) or RJ-14 (two line) phone jacks. It is 18' long and
comes with a T adapter. The T adapter is used when you do not have an
extra jack for the cable connection. It will convert a single phone jack
into two parallel jacks.
T25-EXT Twenty-Five Foot Phone
Line Extension Cable
Provides a 25' extension for standard RJ-11 or RJ-14 phone cables with a
modular plug on one end and a modular jack on the other end. It is
compatible with either single line RJ-11 or two line RJ-14 cables.
MOD-SC Converts Modular Phone
Plug to 3.5mm Mini-Plug
The
MOD-SC is used when you have a cable with a standard RJ-11 single-line
telephone type plug that you need to connect to audio from equipment with
3.5mm mini-plug jack. It has an RJ-11 jack on one end and a 3.5mm monaural
mini-plug on the other end.
The
MOD-SC is typically used to connect modular telephone line cables used with
audio recorders to the audio output of a radio receiver that uses a 3.5mm
jack for speaker or line level audio output.
MTJ-S2 Converts a 2-Line RJ-14
Modular Telephone Jack into
Separate RJ-11 Single Line Jacks
This adapter/cable assembly splits a 2-line RJ-14 circuit/jack into two
RJ-11 jacks (Line-1 on left and Line-2 on right). It is typically used with
the two line jacks on the TeleCorder and other Voice Logging Recorders that
have two inputs on a single modular jack (RJ-14, 6P4C).
PZ-2LA Pressure Zone Room Monitoring
Microphone
The
Omnicron PZ-2LA Microphones are Pressure Zone Microphones designed for
meeting and conference recording. They look like a switch, not a microphone,
so as not to draw attention.
Like
other Pressure Zone Microphones, they use a miniature microphone capsule
mounted near a sound reflecting plate. In this zone, direct sound from the
source combines in phase at all frequencies with reflected sound. The
benefits are many: 6 dB more sensitivity, 6 dB less noise, a wide smooth
frequency response free of phase interference, excellent clarity, and
consistent pickup anywhere around the microphone. A built-in amplifier
provides a high level output. Power for the amplifier in the PZ-2LA is
provided by an AC power adapter which is supplied with the PZ-2LA
microphone. The PZ-2LA comes with a cable for connecting to the RJ-11 jack
on the TeleCorder digital audio recorders. If the microphone is located more
than 25' from your recorder, standard RJ-11 telephone extension cables can
be used. One twenty-five foot (25') extension cable is supplied with each
PZ-2LA.
VIII. Contact Information for Support and Service
Manufactured in China by:
Beijing
ChangXing., Co., Ltd., www.telecorder.com
Distributed in USA by:
Omnicron Electronics
581
Liberty Highway
Putnam,
CT 06260
E-Mail:
support@omnicronelectronics.com
Web:
www.omnicronelectronics.com
Phone:
(860) 928-0377
Fax:
(860) 928-6477
IX. Notes
1. The recorder comes with a factory-set master password, which is in
the machine code that is set by its hardware and
cannot be changed. This password is written on a sheet that comes with the
recorder and will be an effective password forever (keep this password in a
secure place). If you lose the master password, your TeleCorder may have to
be returned
to a factory authorized service facility to determine what
the password is from its
internal hardware.
2. Avoid shaking the TeleCorder, and keep it in an environment with
moderate temperature and humidity that is suitable
for electronic equipment.
3. There are no user-serviceable parts inside of
the TeleCorder. Refer servicing to qualified service personnel. If the clock does not maintain the
correct time and date without external power, an internal battery may need
to be replaced (# CR2032).
4. Do not expose to rain or moisture.
Doc: Revision
5
―
26-November-2004
Go to INDEX
|
|
[